On-Staff Integrator Technical Phone Support Included In Price
Manufacturer: AC Tech / Lenze
Model #: ESV222N02YXC
Horsepower: 3.00 HP / 2.20 Kw
Input Voltage: 240 Volt AC Single or Three Phase
Output Voltage: 240 Volt AC Three Phase
Output Amps: 9.6 Amps
Keypad: Built In Keypad Included
Enclosure: NEMA 4X Indoor Washdown Duty
Electronic Programming Module (EPM) Included
Manufactured in Uxbridge, Massachusetts, U.S.A.
Control Terminal Features:
- 4 Digital Inputs:
- 1 x Dedicated Start / Stop
- 3 x Programmable
- 2 Digital Outputs:
- 1 x Form "A" Relay
- 1 x Open Collector
- 2 Analog Inputs:
- 1 x 0 - 10 VDC
- 1 x 4 - 20 mA
- 1 Analog Output:
- 1 x 0 - 10 VDC or 2 - 10 VDC
- Power Supplies:
- 10 VDC Potentiometer Reference
- 12 VDC, 20 mA Digital Input Reference or 0 VDC Common
- 12 VDC, 50 mA Supply
- Additional Control Terminals (15.00 HP And Above):
- 1 x Programmable Digital Input
- 1 x Common
- Integrated RS-485 Modbus Communications
Modes of Operation:
- Open Loop Flux Vector Control with Auto Tuning
- Open Loop Speed Control with Auto Tuning
- Open Loop Torque Control with Auto Tuning
- Enhanced V/Hz Control with Auto Tuning
- Constant V/Hz Control
- Variable V/Hz Control
- Base Frequency Adjustable to Motor Specifications
Acceleration / Deceleration Profiles:
- Two Independent Acceleration Ramps
- Two Independent Deceleration Ramps
- Linear, S-Type
- Auxiliary Ramp (or Coast-to-stop)
Fixed Acceleration Boost For Improved Starting
Capable Of 500 Hz Output Frequency
Capable Of Higher Carrier (PWM Sine-Coded) Frequencies:
- 4, 6, 8, 10 and 12 kHz
Braking Functions:
- DC Injection Braking
- Optional Dynamic Braking
Speed Commands:
- Keypad
- Potentiometer
- Jog
- Up to 8 Preset Speeds
- Floating Point Control
- Voltage: Scalable 0 - 10 VDC
- Current: Scalable 4 - 20 mA
Process Control:
- PID Modes: Direct and Reverse Acting
- PID Sleep Mode
- Analog Output References to Speed, Load, Torque or kW
- Network Speed Baud Rates
- Terminal and Keypad Status
- Elapsed Run Time
- Elapsed Power On Time
Status Outputs:
- Programmable Form "A" Relay Output
- Programmable Open Collector Output
- Scalable 0 - 10 VDC or 2 - 10 VDC Analog Output
- 4 - 20 mA with 500 Ohm Total Impedance
Standards And Conformance:
- UL
- cUL
- GOST
- C-Tick
- CE Low Voltage (EN61800-5-1)
- CE EMC (EN61800-3) with optional EMC filter
Optional Communications Modules:
- ESVZAC0 - CANopen
- ESVZAR0 - RS-485 Modbus
- ESVZAP0 - Profibus-DP
- ESVZAD0 - DeviceNet
- ESVZAE0 - Ethernet / IP
Optional Additional IO Modules:
Related Documents:
Updating...