7.5 HP US Motors General Purpose Three Phase C-Face AC Motor | 230 / 460 VAC | 9.3 Amps @ 230 VAC 18.6 Amps @ 460 VAC| 213TC Frame | TEFC | 60 Hz | 1765 RPM | C7P2BC, DF64
OBSOLETE PRODUCT. TO PREVENT DOWNTIME, WE STRONGLY ADVISE CONTACTING US FOR REPAIR OR ALTERNATIVES.
Enquiry email sent successfully!
Description
Features: |
Horsepower ………….. 00007.50 ~ KW: 5.595 |
Enclosure …………… TEFC |
Poles ………………. 04 ~ RPM: 1800 |
Frame Size ………….. 213~TC |
Phase/Frequency/Voltage.. 3~060~230/460 ~ Random Wound |
Service Factor ………. 1.15 |
Insulation Class …….. Class “F” ~ Insulife 2000 |
Altitude In Feet (Max) .. 3300 Ft.(1000 M) |
Ambient In Degree C (Max) +40 C |
Assembly Position ……. “F-1” Assembly Position |
Efficiency Class …….. Premium Efficiency |
Application …………. Unknown |
Customer Part Number …. |
“AK” Dimension (Inches).. 8.500 |
Temperature Rise (Sine Wave): “B” Rise @ 1.0 SF (Resist) |
Starting Method ……… Direct-On-Line Start |
Duty Cycle ………….. Continuous Duty |
Efficiency Value …….. 89.5 % ~ NEMA Nominal |
Load Inertia (lb-ft2): NEMA ~ NEMA Inertia: 39.20 ~ 1.00 |
Number Of Starts Per Hour: NEMA |
Motor Type Code ……… TCE |
Rotor Inertia (LB-FT²) |
.684 LB-FT² |
|
Qty. of Bearings PE (Shaft) |
1 |
|
Qty. of Bearings SE (OPP) |
1 |
|
Bearing Number PE (Shaft) |
6309-J/C3 |
|
Bearing Number SE (OPP) |
6208-J/C3 |
|
Nidec trademarks followed by the ® symbol are registered with the U.S. Patent and Trademark Office. |
NIDEC MOTOR CORPORATION
8050 WEST FLORISSANT AVE.
ST. LOUIS, MO 63136
|
 |
|
DATE: |
8/22/2019 |
P.O. NO.: |
DF64 |
|
|
Order/Line NO.: |
21211 MN 100 |
TO: |
|
|
|
Model Number: |
DF64 |
Catalog Number: |
C7P2BC |
Corro-Duty Premium Eff. Config |
CONF,MOTOR,CORRO-DUTY PRE EFF |
|
REVISIONS:
(NONE) |
|
ALL DOCUMENTS HEREIN ARE CONSIDERED CERTIFIED BY NIDEC MOTOR CORPORATION. |
THANK YOU FOR YOUR ORDER AND THE OPPORTUNITY TO SERVE YOU. |
Accessories: |
Corro-Duty |
Ground Lug In Conduit Box |
Special Balance |
Standard Leadtime: REFER TO OFFICE |
Est. Weight (lbs ea): 160 ~ F.O.B.: St. Louis, MO |
|
USE THE DATA PROVIDED BELOW TO SELECT THE APPROPRIATE DIMENSION PRINT |
|
|
|
|
|
|
|
|