Overview
The ACS250 drive is part of ABB's complete micro drive range, which offers a solution for every need - drives for simple to more complex machines. The drive is built to operate on a broad range of applications including conveyors, mixers, printing, fans, and pumps. It is available in IP20 and IP66 enclosures for installation in various operating environments.
From IP20 series you can find 1-phase 110 - 120 V drives for low power applications, such as pumps, fans, grinders, mixers and conveyors, and 600 V drives with more advanced features for general purpose applications. From IP66 series you can find a full range of products for harsh environments. IP66 drives are ideal for wash-down applications and the offering covers all the voltages from 1-phase 110 V to 3-phase 600V.
All the drives include a built-in Modbus-RTU serial communication. Intuitive key pad control and build-in macros make commissioning straightforward. IP66 enclosures are available with or without switch featuring a speed potentiometer, FWD-0.REW and power isolator. In 500 - 600 V advanced product types the additional features include e.g. CAN open interface and built-in safe-torque-off (STO) function.
Besides having a compact design, the ACS250 micro series supports a broad range of input voltage. The IP20 drives offer 115V and 600V options while the IP66 can be powered by a complete voltage range of 115 to 600V. The drive is also built with 150% peak overload capacity making it functional when stressed to its limit.
Feed-through wiring is a prominent feature in the IP20 ACS250 micro-series. It allows the drive to replace motor starters in existing panels easily. On the other hand, the IP60 ACS250 provide reliable operation in a washdown environment, such as the food and beverage application.
System installers installing the ACS250 micro-series will find the LED display on the control panel helpful in configuring and commissioning the drive. Setting up the drive involves configuring key parameters and can be aided with built-in macros. If multiple units need to be configured with similar parameters, the copy stick tool can be used
The ACS250 micro series also features an RJ45 port. The port is used to extend the connectivity of the drive on a serial RS485 interface. Operators can perform remote monitoring and control of the drive with standard Modbus protocol.
ACS250-03U-04A1-4+B063+F278 - Product Highlights
- Power range: 0.5 to 20 Hp, 1 & 3 phase input
- 150% peak overload capacity
- Modbus-RTU built-in
- User-friendly control panel with LED display
- Wall or DIN rail mounting options for IP20 drives
- Feed thru wiring on IP20 drives
- PI control
- Built-in brake chopper (Sizes 2 & 3)
- Sensorless vector and STO (600V drives only)
- Conformally coated boards
- Easy access to power and I/O connections for rapid installation
- Selection options for braking resistors, input reactors, & output filters
ACS250-03U-04A1-4+B063+F278 - Options:
-
- Remote keypad (RCRP-01) provides easy cabinet installations
- Parameter upload/download tool (RCCS-01) for straightforward commissioning
- Relay output card (RCRO-01)
- UL Type 4X/IP66 frames for harsh environments
- Disconnect switch for UL Type 4X/IP66 frames
- Modbus RS485 RJ45 cable splitter
Replacing a motor starter or soft starter with a drive can help improve overall energy efficiency, reduce mechanical stresses and enhance process control.
With its feed-thru wiring, the ACS250 can easily replace motor starters for general purpose low power applications, such as; screws, mixers, pumps, fans and conveyors.
The key features include an integrated keypad for easy configuration, precise process control with an enhanced V/Hz control with variable torque and constant torque V/Hz profiles, and embedded Modbus-RTU communication interface for real time control and monitoring.
Technical documentation for ABB Micro Drives is available in our Technical Library.
Superior Drive Performance:
ACS250-03U-04A1-4+B063+F278 - Modes Of Operation:
-
-
-
- V / Hz (Constant or Variable)
- Base Frequency Adjustable to Motor Specs
ACS250-03U-04A1-4+B063+F278 - Performance Features:
-
-
-
- Integrated drive mounted keypad
- 6 character LED display
- Four programmable preset speeds
- One analog output (0-10 VDC)
- Auto restart (up to 5 attempts)
- One band frequency avoidance
- Fault history (last 4 faults)
- Four digital inputs (2 programmable, 2 user selectable analog / digital)
- Digital input type (pull-up)
ACS250-03U-04A1-4+B063+F278 - Drive Specifications:
-
-
-
- 2 Analog Inputs (0 - 10 VDC, 4 - 20 mA)
- 1 Relay Output (form C relay)
- 1 Analog / Digital Output (0 - 10 VDC: one analog usable for meter or digital output)
- 150% Drive Output Overload Capacity For Up to 60 Seconds
- 175% Drive Output Overload Capacity For Up To 2 Seconds
- 50 - 60 Hz Rated Input Frequency
- 4 - 32 kHz Carrier Frequency (8 kHz default)
- -10 to 40 Degree Celsius Operating Temperature
- Integrated brake chopper on select models
- Up to 150% dynamic braking with appropriately sized resistor
- DC Injection Braking included
- Linear V/Hz, user defined, energy optimizer & boost function.
- 0 - 500 Hz Frequency control range
- Independently adjustable Accel / Decel ramps
- 0 - 600 second time range
- Keypad speed control
- 24VDC logic source inputs
- 150% Electronic motor overload inverse trip for 60 seconds
- 175% Electronic motor overload inverse trip for 2 seconds
- Built-in Modbus-RTU (RS-485) communications
- Built-in PI control
ACS250-03U-04A1-4+B063+F278 - Protective Features:
-
-
-
- Under voltage fault
- Phase-to-phase on drive output short circuit
- Heat sink monitor over temperature
- DC bus level trip on DC bus overvoltage
- Exceed drive rating of 150% for 60 seconds drive overload trip
- Exceed drive rating of 175% for 2 seconds drive overload trip
- Over-current / short-circuit protection fault
- Open output phase trip
- Loss of speed command reference signal trip
- Communications error fault
ACS250-03U-04A1-4+B063+F278 - Popular Applications Include:
-
-
-
- Food Processing Machinery
- Packaging Machinery
- Material Handling Systems
- Conveyor Systems
- Pump Systems
- Fan Systems
- Milling Machines
- Hydraulic Systems
- HVAC Systems
- ... And many others!
ACS250-03U-04A1-4+B063+F278 - Global Standards:
-
-
-
- UL (North America)
- cUL (Canada)
- CE Low Voltage Directive (EN61800-5-1) (Europe)
- GOST (Russia / Ukraine)
- C-Tick (Australia / New Zealand)
ACS250-03U-04A1-4+B063+F278 - Environment:
-
-
- Altitude: 1,000 meters (3,300 feet), derate by 1% per 100 meters up to 2,000 on maximum
- Ambient Temperature: -10 Degrees Celsius to 50 Degrees Celsius
- Storage Temperature: -40 Degrees Celsius to 60 Degrees Celsius
- Relative Humidity: 10% to 95% Non-Condensing
ACS250-03U-04A1-4+B063+F278 ACS250 Micro Series Features
1. ACS250-03U-04A1-4+B063+F278 ACS250 Intuitive User Interface
The ACS250 features a time-saving user interface that allows configuration and commissioning to be done rapidly. Technicians have access to an integrated keypad and display to change the operating parameters. The use of application macros allows the drive to be started with pre-programmed parameters.
2. ACS250-03U-04A1-4+B063+F278 ACS250 Flexible Drive & Network Connectivity
Connectivity on the ACS250 micro-series is made possible with an RJ45 port. It functions as an RS485 interface that allows the drive to be controlled remotely via standard Modbus protocol. An optional Y splitter can be used to integrate the drive into a daisy-chain connection. Besides enabling remote connection, the RJ45 port serves as a terminal for the copy stick tool for transferring parameters.
3. ACS250-03U-04A1-4+B063+F278 ACS250 IP Ratings
Engineered for reliability in various operating conditions, the ACS250 microdrives are available in IP20 and IP66 enclosures. The IP20 drives feature a feed-through wiring and flexible mounting options while the IP66 provide dust and waterproof ABS enclosure that protects the internal electronics in harsh high-pressure washdown conditions.
ACS250-03U-04A1-4+B063+F278 ACS250 Micro Series Other Features
1. ACS250-03U-04A1-4+B063+F278 Applications
- Conveyors
- Mixers
- Material handling
- Fans and pumps
- Automated Gate Control
- Food and Beverage
- Printing
- Woodworking Machinery
2. ACS250-03U-04A1-4+B063+F278 Supporting Options
- Remote keypad (RCRP-01) provides easy cabinet installations
- Parameter upload/download tool (RCCS-01) for straightforward commissioning
- Relay output card (RCRO-01)
- UL Type 4X/IP66 frames for harsh environments
- Drive-mounted operator controls (disconnect, Fwd/Off/Rev, & speed potentiometer for UL Type 4X/IP66 enclosures
- Modbus RS485 RJ45 cable splitter
3. ACS250-03U-04A1-4+B063+F278 Supply Connection
- Voltage : 115 VAC (99-126); 600 VAC (450-660)
- Power range : 0.5 to 20 Hp
- Frequency : 48 to 62 Hz
4. ACS250-03U-04A1-4+B063+F278 Connections
- Voltage : 3-phase, from 0 to USUPPLY
- Frequency : 0 to 500 Hz, 0.1 Hz resolution
- Overload capacity : 150% for 60 seconds
- Motor control methods : V/F voltage vector, energy optimized V/F
5. ACS250-03U-04A1-4+B063+F278 Product Compliance
CE, UL, cUL, C-Tick, EAC
6. ACS250-03U-04A1-4+B063+F278 Environmental Limits
- Degree of protection : UL type Open/IP20 and UL Type 4X/IP66
- Ambient temperature: IP20: –10 to 50 ºC (3,5% derate of output amps for each 1 ºC above 40 ºC to a maximum of 50 ºC – without UL) | IP66/NEMA 4X: –10 to 40 ºC
- Relative humidity : 95% max (without condensation)