Overview
The J1000 series variable frequency drive, developed by Yaskawa, is an ideal solution for systems that demand compactness and reliability. The drive supports electric motors rated between 1/8 to 7.5 HP. It controls the motor speed with the open-loop V/F control.
With the J1000 series VFD, system reliability is increased. The drive has an MTBF of 28 years, which means there’s little risk of operational failure. This is due to the ingenious design, which reduces the number of mechanical parts. The VFD is also engineered with increased vibration resistance.
The J1000 series VFD features a starting torque of 150% at 3Hz. It’s sufficient to drive motors in applications like conveyors, pumps, fans, and industrial washers. If there’s a need, the drive can be operated in the heavy-duty mode, where it could withstand 150% of rated current for up to 60 seconds.
It’s easy to configure and commission the J1000 series VFD. It has an interactive LCD panel that facilitates parameter setup. Instead of setting up the drive from scratch, users can use the pre-defined parameters to cut short setup time.
Maintenance of the J1000 series is also made easy with a few handy features. Technicians can replace the cooling fan without any tools. The drive also has a pre-maintenance function which provides indications for changing the cooling fan, capacitor, and IGBT.
Key features of the J1000 series.
- Open loop V/f control
- Dual rating: Normal Duty and Heavy Duty
- Starting torque of 150% at 3 Hz
- MTBF: 28 years
- Short Circuit Current Rating (SCCR): 30kA RMS symmetrical
- Built-in dynamic braking transistor
- Common programming with all other Yaskawa drives
J1000 Series Features
1. Side-by-Side installation
[caption id="attachment_167065" align="aligncenter" width="333"]
J1000 Series Side By Side[/caption]
Multiple units of J1000 series VFD can be mounted side by side, with only 30 mm minimum spacing. This is possible as the drive is built with a patented hybrid heatsink. It allows optimum heat dissipation despite the close proximity in installation.
2. One-Touch Copy Function
The J1000 series VFD has a one-touch copy function that allows parameter transfer between units. Installers can duplicate the parameters by connecting two VFDs through the RS232C port. Alternatively, parameters can be copied to the PC via USB, before transferring to other units.
3. Modbus RTU Option
With the RS-485 communication interface option, the J1000 series drive can be turned into a Modbus RTU. It’s helpful for remote monitoring when the system involves multiple drives installations.
4. Swing PWM For Motor Noise Reduction
Driving motor at low career frequencies may result in audible noises. The J1000 series has a special Swing PWM option, which uses a special PWM pattern on the 2kHz carrier frequency to minimize noise.
Other J1000 Series Features
1. J1000 Series Options
- Potentiometer Unit
- RS-232 Communication Unit for Remote Operator
- RS-232 Communication Option for Copy Unit/PC
- RS-485 Communication Interface
- USB Copy Unit
- Remote LED Digital Operator
- NEMA 1 Kit
- DIN Rail Kit
- Input CE Filter
- Dynamic Braking Resistor (3% or 10%)
- Input Reactor (3% or 5%)
2. Available I/O
- (5) multi-function digital inputs
- (1) multi-function analog input
- (1) multi-function relay output
- (1) multi-function 0-10 Vdc analog output
- (1) speed potentiometer (optional)
3. Specifications
- Overload Capacity
- 150% Overload for 60 sec. (Heavy Duty)
- 120% Overload for 60 sec. (Normal Duty)
- Output Frequency
- Control Methods
- Open Loop V/f Control
- Speed Range: 40:1
- Protective Design
- Braking Transistor
- Braking Torque
- 20 - 40% increase with intelligent high flux braking function
- KEB Function
- Uses mechanical energy to continue operation during momentary power failure, standard
- Overvoltage Function
- Prevention function for food and beverage machine and other applications
- Maintenance
- Elapsed timer assists in preventative maintenance for cooling fan, capacitors, and transistors
- Easily replaceable cooling fan
- Global Certification
- Network Communication
- Optional: RS-232C, RS-422/485 MODBUS 38.4 kbps
- Keypad Operator Standard LED 5 digit display