Overview
Manufactured in the UK, Optidrive P2 is Invertek Drives’ answer to the demands for a cost-effective variable speed drive that performs reliably in harsh environments. Each of the drives can withstand 150% overload for up to 60 seconds, which makes them favorable for heavy-duty applications.
The Optidrive P2 drives work with various types of motors, including AC induction, permanent magnet, brushless DC, and synchronous reluctance motors. The drive supports 200V to 600V input for single and 3-phase voltages. With a high starting torque of up to 200%, the drive provides accurate control for all types of loads.
Besides the robust performance, the Optidrive P2 is available in IP20, IP55, and IP66 enclosures. Systems that demand a dust-free and wash-down heavy-duty VFD will find the Optidrive P2 an ideal option. The versatility and robustness of the drive make it a favorite for mining, metal processing, rubber, plastics, and F&B applications.
Installation of the Optidrive P2 is made simple with the keyhole mounts and pluggable control terminals. Parameter configuration is done via the integrated keypad and display, which allows parameter setup and control of the drive. The built-in integral brake transistor and EMC filter also mean reduced external components during installation.
The flexibility of the Optidrive P2 is also empowered by the optional plugin modules, including communication interfaces, I/O, EMC filters, and encoders. Installers can also program the drive with the Optistick Smart and the OptiTools software.
Key features of the Optidrive P2:
- Simple PLC functionality
- Built-in EMC filter
- Low ambient operation (-10°C)
- Dedicated hoist mode
- IP20, IP55, and IP 66 enclosures
OPT-2-L3090-20 Optidrive P2 Features
1. OPT-2-L3090-20 PLC Functionality
Programming on the Optidrive P2 is simplified with block-type functions used in a PLC. Installers can work with basic PLC functions, comparators, timers, mathematical functions, and drive-specific logics to configure the drive's behavior.
2. OPT-2-L3090-20 Safe Torque Off
The Optidrive P2’s built-in safe torque off feature immediately disable the drive in abnormal conditions. The feature removes the need for an external input contactor and additional wiring, which leads to faster installation. It also offers better safety standards compared to mechanical solutions.
3. OPT-2-L3090-20 Connectivity With Communications Modules
Optidrive P2 supports major communication industry protocol that allows the drive to be connected into existing networks. Its built-in module supports Modbus RTU and CANopen while additional modules can be inserted to connect with these protocols:
- Profibus
- Profinet
- DeviceNet
- Ethernet/IP
- EtherCAT
- ModbusTCP
Other OPT-2-L3090-20 Optidrive P2 Features
1. Input Ratings
- Supply Voltage
- 200 – 240V ± 10%
- 380 – 480V ± 10%
- 500 – 600V ± 10%
- Supply Frequency
- Displacement Power Factor
- Phase Imbalance
- Inrush Current
- Power Cycles
- 120 per hour maximum, evenly spaced
2. Output Ratings
- Output Power
- 230V 1Ph. Input: 0.75–2.2kW (1–3HP)
- 230V 3Ph. Input: 0.75–75kW (1–100HP)
- 400V 3Ph. Input: 0.75–250kW
- 460V 3Ph. Input: 1–350HP
- 575V 3Ph. Input: 0.75–110kW (1–150HP)
- Overload Capacity
- Output Frequency
- 0 – 500Hz, 0.1Hz resolution
- Acceleration Time
- Deceleration Time
- Typical Efficiency
3. Ambient Conditions
- Temperature
- Storage: −40 to 60°C
- Operating: −10 to 50°C
- Altitude
- Up to 1000m ASL without derating
- Up to 2000m maximum UL Approved
- Up to 4000m maximum (non UL)
- Humidity
- Vibration
- Conforms to IEC 60068-2-6
- Sinusoidal Vibration
- 10 - 57Hz @ 0.075mm Pk
- 57 - 150Hz @ 1g Pk
4. Enclosure
5. Programming
- Keypad
- Built-in keypad as standard
- Optional remote mountable keypad
- Display
- Built-in multi language text display (IP55 & IP66)
- 7 Segment LED (IP20)
- PC
6. Control Specification
- Control Method
- V/F Voltage Vector
- Energy Optimsied V/F
- 3GV Sensorless Vector Speed Control
- 3GV Sensorless Vector Torque Control
- Closed Loop (Encoder) Speed Control
- Closed Loop (Encoder) Torque Control
- PM Vector Control
- BLDC Control
- Synchronous Reluctance
- PWM Frequency
- Stopping Mode
- Ramp to Stop: User Adjustable 0.01–600 secs
- Coast to Stop
- Braking
- Motor Flux Braking
- Built-in Braking Transistor
- Skip Frequency
- Single point, user adjustable
- Setpoint Control
- Analog Signal
- 0 to 10 Volts
- 10 to 0 Volts
- −10 to +10 Volts
- 0 to 20mA
- 20 to 0mA
- 4 to 20mA
- 20 to 4mA
- PTC
- Digital
- Motorised Potentiometer (Keypad & Terminal)
- Modbus RTU
- CANopen
7. Fieldbus Connectivity
- Built-in
- CANopen
- Modbus RTU
- 6 - 115.2 kbps selectable 8N1, 8N2, 8E1, 8O1
- Optional
- Other
- PROFIBUS DP (DPV1)
- PROFINET IO
- DeviceNet
- EtherNet/IP
- EtherCAT
- Modbus TCP
8. I/O Specifications
- Power Supply
- 24 Volt DC, 100mA, Short Circuit Protected
- 10 Volt DC, 10mA for Potentiometer
- Programmable Inputs
- 5 Total as standard (Optional additional 3)
- 3 Digital (Optional additional 3)
- 2 Analog / Digital Selectable
- 5 Digital With CAN IO Option
- Digital Inputs
- Opto - Isolated
- 8 – 30 Volt DC, internal or external supply
- Response time < 4ms
- Analog Inputs
- Resolution: 12 bits
- Response time: < 4ms
- Accuracy: < 1% full scale
- Parameter adjustable scaling and offset
- PTC Input
- Motor PTC / Thermistor Input
- Trip Level : 3kΩ
- Programmable Outputs
- 7 Total (Optional additional 3)
- 2 Analog / Digital
- 2 Relays (Optional additional 3)
- 3 With CAN IO Option Module
- Relay Outputs
- Maximum Voltage: 250 VAC, 30 VDC
- Switching Current Capacity: 5A AC , 5A DC
- Analog Outputs
- 0 to 10 Volt
- 0 to 20mA
- 4 to 20mA
9. Application Features
- PID Control
- Internal PID Controller
- Multi Setpoint Select
- Standby / Sleep Mode
- Boost Function
- Hoist Mode
- Dedicated Hoist Mode
- Motor Holding Brake Pre-Torque & Control
- Over Limit Protection
10. Maintenance & Diagnostics
- Fault Memory
- Last 4 Trips stored with time stamp
- Data Logging
- Logging of data prior to trip for diagnostic purposes:
- Output Current
- Drive Temperature
- DC Bus Voltage
- Plus more in Optitools
- Maintenance Indicator
- Maintenance Indicator with user adjustable maintenance interval
- Onboard service life monitoring
- Monitoring
- Hours Run Meter
- Resettable & Non Resettable kWh meters
- Cooling Fan Run Time
11. Standards Compliance
- Low Voltage Directive
- EMC Directive
- Additional Conformance
- Marine Certification
- Environmental Conditions
- Designed to meet IEC 60721-3-3, in operation:
- IP20 Drives: 3S2/3C2
- IP55 & 66 Drives: 3S3/3C3
(361 KB)
