Tag Archive for: Fault Codes

VFD Overvoltage Fault – troubleshooting variable frequency drives
A VFD overvoltage fault is fairly common with VFD regular usage. This fault may arise at different places and times for several reasons. The first step in resolving the problem is identifying when and where the fault occurs. A VFD overvoltage…

Cutler Hammer VFD Fault Codes: Current and Overcurrent Protection
Cutler Hammer VFD Fault Codes, current control and overcurrent protection on the 9000X drive is based on motor current measurement in all three phases. In the FR9/CH61 and above drives, the current sensors are built into the IGBT SKIP modules,…

Eaton SVX9000 Over Temp
The trip level for Eaton SVX9000 over temp default is 90C on the IGBTs and B5C for the power board. Depending on the drive size there may be up to B different temps that can be read from the HMI. FRB and below drive only have one sensor…

Lenze AC Tech EPM – Electronic Programming Module
The EPM contains the drives operational memory. Parameter settings are stored in the EPM and setting changes are made to the "User Settings" in the EPM.
An optional EPM Programmer (model EEPM1RA) is available that allows:
An EPM to…
